# How do I adjust the strap of my watch?

> Our straps all have a small pin on the bottom side which enable you to easily detach the strap and attach a new one    Once the strap clicks into the holes i

Source: https://help.rosefieldwatches.com/en_us/how-do-i-adjust-the-strap-of-my-watch-B1gb8akH3

Last updated: 2026-11-09T16:10:12.896Z

All our straps have a small pin on the underside, so you can easily remove a strap and attach a new one. Once the strap clicks into the holes, it's securely fixed to the case, so you don't have to worry about it falling off. The instruction booklet that comes with your watch has a step-by-step guide to changing straps.

<span class="fr-mk" style="display: none;">&nbsp;</span><span class="fr-mk" style="display: none;">&nbsp;</span>

##   

**How do I adjust the length of my strap?**

_Stainless steel link straps_

1.  Insert a small needle or tweezers into the hole on the side of the strap and push the pin out in the direction of the arrow. Tap lightly with a small household hammer until the pin comes out the other side, then pull it out.
2.  Remove or add links as needed. If you remove more than one link, take the same number from both sides so the strap stays symmetrical.
3.  Put the pins back in the opposite direction of the arrows and tap them back in with the hammer.

<span class="fr-mk" style="display: none;">&nbsp;</span><span class="fr-mk" style="display: none;">&nbsp;</span>

_Mesh straps_

1.  Insert a paper clip or tweezers into the slot and lift the clasp plate.
2.  Turn the strap over and slide the clasp to the position you want.
3.  Press the clasp plate firmly back down to lock it.

These instructions are also included in your watch box.

<span class="fr-mk" style="display: none;">&nbsp;</span><span class="fr-mk" style="display: none;">&nbsp;</span>

Note: the clasp in the video may look slightly different depending on your watch model.

  

_Studio (double chain) straps_

1.  Insert a small needle or tweezers into the hole on the side of the strap and push the pin out in the direction of the arrow. Tap lightly with a small household hammer until the pin comes out the other side, then pull it out.
2.  Remove or add links as needed.
3.  Put the pins back in the opposite direction of the arrows and tap them back in with the hammer.

<span class="fr-mk" style="display: none;">&nbsp;</span><span class="fr-mk" style="display: none;">&nbsp;</span>
